Safety Instructions Relating Specifically To The Equipment; Rechargeable Battery; Charging Battery - Meister BAS 108 LIO Traducción De Las Instrucciones De Servicio Originales

5401010-Akku-Bohrs-man.qxd
6 – Safety instructions
relating specifically to
the equipment
• Use the appliance, the charger and the
attachments, only for their intended
applications!
• Before laying the stick screwdriver
aside, ensure that all moving parts
have come to a standstill.
• Avoid frequent blocking when drilling,
tightening or loosening screws.
• Connect the charger only to a 230 V
AC power supply.
• Charge the screwdriver battery only
with the charger supplied.
• Protect the charger and the
screwdriver from contact with
moisture. Never immerse in water!
• Do not use the charger in the open air.
• To avoid damage to the batteries,
never expose them to temperatures of
over 50 °C.
CAUTION! Do not short-circuit the
contacts of the battery or charger.
• When charging, ensure that the
device is correctly connected („+/–").
• Do not attempt to burn the battery.
• The connection cord cannot be
replaced. In case of damage, dispose
of the device in the correct manner. In
case of damage, dispose of the
device in the correct manner.
62
24.03.2010 11:45 Uhr
All manuals and user guides at all-guides.com
Seite 62
7 – Charging battery
This battery-powered screwdriver
BAS 108 LIO may only be charged
using the SH-10.8 V 400 mains adapter
unit. The mains adapter unit may only
be operated with a power supply that
has an alternating current of 230 V and
a frequency of 50 Hz. The use of any
other mains adapter units or the use of
the SH-10.8 V 400 with another type of
power supply may lead to personal and
property damage.
Lithium-ion battery technology
This new type of battery has decisive
advantages over conventional Ni-Cd
batteries:
• No memory effect, i.e. regardless of
its charge status the battery can be
recharged at any time before or after
use without loss of capacity.
• Extremely low self-discharge, so it is
ready for use even after longer storage
periods.
• Light in weight
• Long service life
Charging process
Caution! The rechargeable
battery is not fully charged on
leaving the factory. Charge the
rechargeable battery before first use.
Caution! The working temperature
of the charger is 0 degree to
45 degrees.
Connect the charging plug (8) of the
power supply (7) to the charge station (6).
Connect the power supply to a power
socket (230V~).