Device Configuration - CAME CP Serie Manual Para El Instalador

DEVICE CONFIGURATION:

SSIP: LAN network interface
Make sure the device is switched on and connected to the same local network as the
computer's; contrarily change the network settings to match those of the device (predefined
values: address IP 192.168.1.100, net mask 255.255.255.0).
Open the browser and enter the device's IP address in the address bar; the access page will
be displayed:
Enter the web installer's password in the corresponding field
(predefined value: admin).
Modify the device's network configuration as required. Finally,
change the predefined web installer password (field: Web
Technical Password).
SIFLAN: Interface for LAN network with Webserver
Make sure the device is switched on and connected to the same local network as the computer's;
contrarily change the network settings to match those of the device (predefined values: address IP
192.168.1.100, net mask 255.255.255.0).
Open the browser and enter the device's IP address in the address bar; the access page will be displayed:
Enter the web installer's password in the corresponding field
(predefined value: admin). After accessing, the following page
will be displayed:
SSIP
SSIP
SIFLAN
SIFLAN