Craftsman F1725 Manual De Usuario página 3

ASSEMBLY
STEP (1):
• Assemble (2) (EE) in each (A). Some adjustments may be
necessary after workbench is in desired position.
A
STEP (2):
For 6' Workbench skip this step
AA(16)
• Assemble (1) (B) and (1) (D), as shown, using (8) (AA), (8)
(BB), and (8) (CC).
• Repeat for other top support rail.
• Finger tighten.
AA
B
All manuals and user guides at all-guides.com
EE(4)
EE
BB(16) CC(16)
BB
CC
D
STEP (3):
AA(8)
• Place workbench top (Purchased Separately), (D) with top side
down. (Use packaging material to prevent scratches.
Note: The rail (B) with the label should be placed toward the front
of the unit with the label upside down.
• Assemble (2) (A) and (2) (B), as shown, using (8) (AA), (8)
(BB), and (8) (CC). Flanges of (B) should point in. Notches
should be up.
• Finger tighten.
CC
BB
Front
STEP (4):
AA(6)
• Attach remaining (B) in top back set of holes in (2) (A) as
shown, using (4) (AA), (4) (BB), and (4) (CC). Flanges of (B)
should point out.
• Attach remaining hardware in bottom holes in top front set of
holes as shown in illustration.
• Finger tighten.
3
BB(8)
AA
Flanges
point in
B
Back
BB(6)
CC(8)
(EE)
on top
A
Notches
on top
CC(6)