Use - Wilfa NATURE HU-400WW Manual De Instrucciones

USE

• Fill the water into the water tank from the top cover. Or take out the water
tank and fill water directly into the water tank. Afterwards put the water tank
back on the main base.
• Check if the rated voltage meets the input voltage and plug into the socket.
Humidifier will go into standby mode.
• Touch the ON/OFF button, if the water tank is empty, the button will be red.
Touch the button again and the humidifier will turn off.
• If there is enough water in the water tank, and you press the button, the
humidifier works in the lowest speed with button showing purple. If you touch
the button again the humidifier will increase the speed, and the button turns
green. At the third touch the humidifier starts in the highest speed, and the
button turns blue. Press one more time to turn the humidifier off. There is a
total of 3 speeds.
• Each time you touch the button it will beep. When the water tank is empty,
the humidifier will make 3 beeps as a warning, the button will turn red, and
the humidifier will stop working. Refill the water tank, touch the button, and it
will restart.
• When the humidifier is on, do not lift the water tank up from the main base,
this will turn the humidifier off. Put the water tank back, and the humidifier will
work in previous mode.
NATURE · HU-400WW
11
EN