Battery Charging - LaserLiner NovaMaster 500 Manual De Instrucciones

1
Light levels
1. Click: hold the button down for 1 or 2 seconds:
Switch on / light level: high mode
2. Click Medium mode
3. Click: Low mode
4. Double click: boost mode
5. Click: hold down for 1 or 2 seconds: switch off
ON
1.
Click
2 sec
2
Adjusting the light beam
1. Clockwise rotation: zoom in for a
narrow beam of light.
2. Anti-clockwise rotation: zoom out
for a wide beam of light.
3

Battery charging

1. Remove rubber cover
2. Connect the device to a power source using
the USB-C interface and USB-C cable.
Red LED: charging
Green LED: battery fully charged
08
EN
2.
1x Click
250 lm 120 lm
HIGH MEDIUM
3
3. 4.
1x Click 2x Click
60 lm 500 lm
LOW BOOST
4
7
OFF
5.
Click
2 sec