Creative CB2530 Manual Del Usuario página 8

CB2530 Headphones.book Page 6 Thursday, January 13, 2005 2:55 PM
4. Keep your headphones within 10 meters of the audio adapter, as shown in Figure 5.
• Make sure that your headphones are within the working distance of the audio
adapter. When the headphones are out of working range, the Bluetooth LED on both
the headphones and the audio adapter remains lit in blue.
• To reconnect the headphones and the audio adapter, bring the two devices closer.
• When battery levels are too low, during the last 10 minutes before your headphones
turn off,
• the POWER LED blinks red.
• your headphones beep every 30 seconds.
• Pairing your headphones with a new device can take up to 15 seconds. Subsequent
pairing with the same device will take significantly less time.
6
All manuals and user guides at all-guides.com
Figure 5