U-Reach NV-BM Serie Manual Del Usuario página 20

1. Use a clean source device to make the analyzed data capacity shorter.
(Clean Source Device means no garbage data in the source device.)
Caution
2. The target device must be new or wholly cleaned prior to copy. Otherwise,
there is risk for data combination.
6.3 Copy GPT Backup Area
Disabling this function makes the duplicator ignore the GPT backup area, and thus allows
the duplicator to copy from a big capacity device to a small capacity device(s).
The partition size of the source HDD should be smaller than target capacity.
Note
Otherwise, it is recommended to leave the GPT backup area intact.
GPT backup areas will be rebuilt automatically the next time Windows
Caution
reboots. For Linux, tools such as gdisk can rebuild these backups.
6.4 Skip Bad Sectors
Skip source bad sectors during Copy/Compare.
Scroll to select "6.4 Skip Bad Sectors", then press "OK" to scroll through the available values
for skipping bad sectors. If the device data is critical and needs to be a full clone, it is
recommended to set "Skip Bad Sectors" at "0." Bad sectors can be set as unlimited or at a
value from 0 to 65,535.
Caution The "Copy+Compare" function is advised for enhanced copy accuracy.
GPT Index
Partition
Disabling function "6.3 Copy GPT Backup Area" will
force the duplicator to ignore this area.
GPT Backup Area
20