U-Reach NV-BM Serie Manual Del Usuario página 23

HPA function "Copy and Setting" may change the original parameter of target
Caution
devices. To reset it, user must set "6.5.6 Clear HPA at Erase >> Clear HPA
Setting" and then execute "4. Erase."
6.6.6 Clear HPA at ERASE
Sets to clear HPA setting during erase.
Scroll to select "6.6.5 Clear HPA at Erase", then press "OK" to save this setting.
Clear HPA Setting
Clears HPA setting and data during erase.
Scroll to select "6.6.5 Clear HPA at Erase >> Clear HPA Setting", then press "OK" to save this
setting.
Keep HPA Setting
Keeps original HPA setting and data during erase.
Scroll to select "6.6.5 Clear HPA at Erase >> Keep HPA Setting", then press "OK" to save this
setting.
6.6.7 Wait Device Time
Set device power up buffer time prior to copy, erase, etc...
Scroll to select "6.6.6 Wait Device Time, then press "OK" to set buffer time.
6.6.8 Lock Key
This function allows user to enable or disable the 4 control panel buttons.
Scroll to select "6.6.7 Lock Key", then press "OK" to access available settings.
Disabled
Scroll to select "Disabled", then press "OK" to save this setting.
Enabled
Only down/up buttons are disabled. Reboot system for setting to be in effect.
Scroll to select "Enabled", then press "OK" to save this setting.
6.6.9 Stop Motor Time
Set device power down buffer time prior to device disconnection.
Scroll to select "6.6.8 Stop Motor Time", then press "OK" to set buffer time.
6.6.10 Boot Password
Sets up the login password for system.
Disabled
23