Troubleshooting - GYS MI 80P Manual Del Usuario

MADE IN FRANCE

TROUBLESHOOTING

Symptoms
The 2 indicators are on, the machine
does not deliver any current.
The green indicator is on, but the
machine does not weld.
The product is under voltage, you are
feeling tingling when touching the
machine's body.
The machine welds poorly.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
GYSMI 80P 130P 160P 200P
Causes
The thermal protection has switched
on.
Fault with earth clamp/cable connec-
tion.
The earth contact is faulty.
Polarity error (+/-).
Remedies
Wait for the end of the cooling cycle.
Check the connections
Check the plug and the earth of your
installation.
Check the polarity (+/-) recom-
mended on the electrode box.
EN
13