Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels; Optional Kits; Accessories - Blastrac BDC3140 DB Manual De Instrucciones

Instruction Manual BDC3140 DB/LP

Vacuum cleaner description

Vacuum Cleaner Parts and Labels

1. Identification plate which includes:
Model Code, Class, Technical Specifications (see table
on page 7), Serial No., CE Mark, Year of manufacture,
Input voltage.
2. Vacuum union hose
3. Control panel
4.
-
5. Dust container
6. Filtering chamber
7. Outlet
8. Attention plate
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is turned
OFF (see also par. "Primary filter shaker").
9. Panel power plate
Indicates that the panel is powered by the voltage
indicated on the data plate.
10. Inlet
11. Accessories compartment
12. Vacuum gauge
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (10) and blows out through the outlet
(7).
Before turning the vacuum cleaner on, fit the vacuum hose
into the inlet and then fit the required tool on to the end
part. Refer to the manufacturer's accessory catalogue or
Service Centre. After the hose and tools have been fitted,
make sure that the motor turns correctly.
This vacuum cleaner is equipped with an internal baffle
plate which subjects the vacuumed substances to a circular
GB
centrifugal movement that makes them drop into the
container. The vacuum cleaner is equipped with a filter which
enables it to be used for the majority of applications.
Figure 1

Optional kits

Please contact the manufacturer's sales network for
information on optionals.
Instructions for installing the optional are included in the
conversion kit.
WARNING!
Use only supplied and authorised genuine spare
parts.

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and
authorised by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
Figure 2
Model
(mm)
400/50
BDC3140
1200
DB
230/60
400/50
BDC3140
1200
LP
230/60

Unpacking, moving, use and storage

Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight).
www.blastrac.eu ‒ info@blastrac.eu
4/16
A B C
Kg
(mm) (mm)
169
700 1700
191
172
700 1700
194