Starting-Up; Brake Working Instructions; Powercompact Microprocessor Instructions - Nordcap APKTM 2T Manual De Instrucciones

 Do not put in hot drinks or hot food.
 Do not block the air circulation vents, as this will seriously affect the efficiency of the compressor.
 Do not use pointed objects to remove ice - that could damage the evaporator and be dangerous to health and environment.
 Cover the food to avoid damaging the evaporators.
 Do not load the shelves with more than its maximum load capacity (20 Kg).
 If you do not fallow the above advises, there will be an increase usage electrical energy.
4.1 - Starting- up
Ensure that the plug has been introduced correctly into the socket or that the switch for the cupboard has been connected.
 Then connect the cupboard, which involves – see also the enclosed electronic controller data sheet:
 Press button "B", the green light will light up and shall confirm the connection, attend, and at the same time, the display will
flash for a few seconds until it indicates the inside temperature.
 Temperature regulation is carried out automatically by electronic thermostat "A".
4.2 – Brake working instructions (option)

4.3. Powercompact microprocessor instructions

4.3.1 Definitions
Set Point – The lowest temperature in ºC inside the cabinet.
Differential – Interval of temperature in ºC for the working of the cabinet.
4.3.2 Change of the SET POINT
1- Press the key for 1 second to display the value of the SET POINT 1;
2 – Use the key or
3 - Press for 5 seconds to confirm the new value.
MNS00024_03
TEC
INSTRUCTIONS MANUAL
Brake
to increase or decrease the value;
N.º
MNS00024_03
Release the brake
St1 - Set point of the counter
St2 – Set point off the topping shelf
P1 – Diferential off the counter
P2 – Diferential off the topping shelf
11/45