8. Fix the 4 screws. Do not over
tighten the screws.
9. Check the filter is properly
fixed and the sealing between
head
and
secured.
5. Trouble shooting
Repair
or
service
components such as cord or motor,
must only be carried out by an
authorized service centre.
If the machine does not start
Check
that
correctly fitted to the wall
socket.
A fuse in the building may
have blown and needs to be
changed.
The cord or plug may be
damaged
repaired by an authorized
service centre.
Reduced suction power
The tank (2) may be full and
needs to be emptied, see
instructions.
The pre-filter (11) can be
blocked and have to be
cleaned, see chapter 3.2
The bent tube, hose, tube or
nozzle may be blocked and
needs to be cleaned.
20
filter
frame
of
electrical
the
plug
is
and
must
be
6. Guarantee
This vacuum cleaner is covered by a
is
two
(2)
machine, which covers the motor,
switch and casing. The nozzles, filters,
hoses, tubes and other accessories are
covered
manufacturing fault only and exclude
wear and tear.
The guarantee includes spare parts and
labour costs, and covers manufacturing
and material defects that may occur
during normal domestic use.
Service under the guarantee will only
be performed if it can be proven that
the
defect
product's guarantee period (a correctly
completed guarantee certificate or
printed/stamped cash register receipt
with date and product type) and on
the condition that the vacuum cleaner
was bought as a new product.
6.1 Guarantee does not cover
• Normal wear and tear of accessories
and filters.
• Defects or damage occurring as a
direct or indirect result of incorrect
use - such as the vacuuming of rubble,
hot ashes or carpet deodorant powder.
• Abuse, loss or lack of maintenance
as described in Instructions for use.
•
If the machine has been used for
suction of water
Nor will it cover incorrect or poor
configuration,
connection,
lightning strike or unusual voltage
year
guarantee
twelve
months
occurred
within
i.e.
setting
nor
fire-damage,
EN
EN
on
the
due
to
the
up
or
fire,