BGS technic 9835 Manual De Instrucciones página 3

SPECIFICATIONS
Delivery rate: 550 ccm per double stroke
Stroke: 205 mm
Pump housing Ø: 62 mm
Dimensions: 450 x 90 mm
Material: Polypropylene (PP)
Pump head with two-way valve
SCOPE OF DELIVERY
Transfer Hand Pump
PVC hose, interior Ø 9.5 mm (3/8"), exterior Ø 13.5 mm, length 500 mm
PVC hose, interior Ø 9.5 mm (3/8"), exterior Ø 13.5 mm, length 1000 mm
Nylon hose, interior Ø 7 mm, exterior Ø 9.5 mm (3/8"), length 360 mm
INTENDED USE
This Transfer Hand Pump is used to extract and transfer water, Adblue®, diesel, petrol, brake fluid,
antifreeze, motor oil, gearbox oil and power steering oil. The pump head with built-in two-way valve
enables an easy and clean transfer of liquids.
SAFETY INFORMATION
This hand pump is built according to state-of-the-art technology and safety regulations. There can
nevertheless be hazards for the operator or third parties or damage to the hand pump or other
material assets when it is being used. The instructions in these operating instructions, particularly the
safety information, must therefore always be observed.
•
Read the operating instructions before using the pump for the first time.
•
The hand pump and its components are intended solely for use with the liquids listed and for
the described use. Any other use or use beyond what is specified is not considered intended
use. The manufacturer is not liable for damage resulting from such use, and the risk is borne
solely by the operator.
•
Use the hand pump only for the liquids named under "Intended Use"; other liquids can damage
the pump and result in injuries.
•
The hand pump is designed for the technical sector and must not be used for other purposes.
•
Before using, inspect the hand pump for damage. Do not use the hand pump if it is damaged.
•
The hand pump is designed for handling substances that are hazardous to water. The rules
and regulations that apply to the job site must therefore be observed.
•
Keep these operating instructions handy at the job site and hand over the operating
instructions when transferring the hand pump to a third party.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Transfer Hand Pump, 550ccm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9835
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed