BGS technic 9835 Manual De Instrucciones página 4

COMPONENTS
1
1 Operating handle
2 Pump housing
3 Pump head with two-way valve
4 Intake hose
5 Discharge hose
6 Additional hose, rigid
USE
1. Attach both PVC hoses with the spring steel clamp on the pump head. There are two PVC hoses
included with delivery. One hose is 50 cm long, the other is 100 cm. They can be freely selected
as an intake hose and discharge hose as needed.
2. Immerse the intake hose (4) into the liquid to be siphoned.
3. Position the discharge hose (5) into the container into which the liquid is to be transferred.
4. Hold the hand pump on the pump housing and pull with the other hand on the operating handle.
The liquid will now be drawn into the pump housing.
5. When you push the operating handle again in the direction of the pump housing, the intake side
is closed by the two-way valve, the discharge side is open and the liquid can be transferred by
steady pumping movements via the discharge hose into an external container.
6. The rigid additional hose included with delivery can, if necessary, be slid into one of the two PVC
hoses.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
2 3
6
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
4
5
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed