Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
d
= collet bore of the collet chuck
D
= max. permissible diameter of the cutter
max
m
= Weight without mains cable
Measured values determined in conformity with EN
62841.
Machine in protection class II
~
AC Power
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 62841:
a
= vibration emission value
h
(Slot milling in MDF)
K
= uncertainty (vibration)
h
Typical A-effective perceived sound levels:
L
= sound pressure level
pA
L
= acoustic power level
WA
K
, K
= Uncertainty
pA
WA
The noise level can exceed 80 dB(A) during
operation.
Wear ear protectors!
ENGLISH en
15
Publicidad
Tabla de contenido
