Battery-Operated Power Tools - GreenWorks Pro VU0B01 Manual Del Operario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Wear heavy long pants, boots, and gloves. Avoid loose
garments or jewellery that could get caught in moving
parts of the machine or its motor.
Do not force tool. Use the correct tool for your
application. The correct tool will do the job better and
safer at the rate for which it is designed.
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance.
Do not use the tool if the switch does not turn it on or off.
Any tool that cannot be controlled with the switch is
dangerous, and must be repaired.
Do not operate this tool when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
Do not operate in poor lighting. Do not use to pick up
flammable or combustible liquids, such as gasoline, or
use in areas where they may be present.
Do not pick up anything that is burning or smoking, such
as cigarettes, matches, or hot ashes.
Do not use without collection tank, or tubes in place (if
applicable).
Do not leave tool when plugged in. Unplug from outlet
when not in use and before servicing.
Do not use with damaged cord or plug. If tool is not
working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service
center.
Do not pull or carry by cord, use cord as a handle, close a
door on cord, or pull cord around sharp edges or corners.
Do not run tool over cord. Keep cord away from heated
surfaces.
Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
Do not handle plug or tool with wet hands.
Do not use without dust bag and/or filters in place.
Disconnect the battery pack/power source from the tool
before making any adjustments, changing accessories, or
storing tool. Such preventive safety measures reduce the
risk of starting the tool accidentally.
Turn off all controls before unplugging.
Always turn off this tool before connecting or
disconnecting either hose.
This tool is provided with double insulation. Use only
identical replacement parts. See instructions for Servicing
of Double-Insulated tools.
To reduce The risk of fire or rlectric shock, use tool only
withGreenworks identical parts and supply cords. If cord
is damaged or lost, replace with identical replacement
part.
To reduce the risk of electric shock, this tool has a
polarized plug (one blade is wider than the other). This
plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.
Follow all charging instructions and do not charge the
battery pack or tool outside of the temperature range
specifie in the instructions. Charging improperly or at
English
temperatures outside of the specifie range may damage
the battery and increase the risk of fire.
Do not modify or attempt to repair the tool or the battery
pack (as applicable) except as indicated in the instructions
for use and care.
Do not put any object into the openings when you use the
machine as a blower. Do not use with any opening
blocked. Keep free of dust, lint, hair, and anything that
may reduce air flow.
3
BATTERY-OPERATED POWER
TOOLS
Do not use battery-operated appliance in rain.
Turn off all controls before removing the battery.
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
Use only the charger supplied by the manufacturer to
recharge.
Use appliances only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to battery pack, picking up
or carrying the appliance. Carry the power tool with your
finger on the switch or energize power tool that have the
switch on invites accidents.
Disconnect the battery pack from the power tool before
making any adjustments, changing accessories, or storing
the power tool. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
Do not incinerate the appliance even if it is severely
damaged. The batteries can explode in a fire.
Do not use a battery pack or appliance that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk
of injury.
Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause an explosion.
Have servicing performed by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the product is maintained.
5
EN

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido