Sensor Gage Con- Nections - Pfeiffer Vacuum TPG 366 Instrucciones De Instalación

Installation
Earthing
1.4 Connections
Overview
1
SENSOR gage con-
nections
6
On the rear side of the device there is a screw TPG 366 that can be connected, for ex-
ample, to the pumping unit grounding conductor, if necessary.
X
Fig. 6: Protective ground
x
®
MaxiGauge
Position Designation
1 USB interface (type A)
2 Gage connections (SENSOR 1 ... SENSOR 6)
3 Control feature connection (CONTROL)
4 Relay contact connection (RELAY)
5 Serial interface (RS-485)
6 USB interface (type B)
7 Grid connection (3-pin)
8 Ethernet interface
A device socket is provided for each measuring channel for connecting a measuring
tube.
2
8 7 6 5 4
X: Protective ground
3