Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Stereo recording and playback / Second Audio Program (SAP)
NOTES:
• When playing back a tape that is not
recorded in Hi-Fi stereo mode, the
audio will automatically be monaural.
• When listening to a VHS Hi-Fi video
tape or MTS broadcast through the
VHF/UHF jack (Audio/Video cord not
connected), the sound will be
monaural.
5V40701A [En]30-35
Stereo recording and playback
The VHS Hi-Fi audio system permits high fidelity recording of
MTS STEREO TV broadcasts.
When an MTS STEREO broadcast is
received, the word STEREO will
appear on the screen and the program
can be viewed or recorded in stereo.
The Hi-Fi STEREO recording
procedure is the same as for normal
recordings.
NOTE:
When using a Cable TV system, stereo TV programs may be
transmitted over a mono cable channel. In this case the word
"STEREO" will not appear and the sound will be in mono.
Output selection
When viewing an MTS STEREO TV program, or playing a
prerecorded VHS Hi-Fi STEREO video tape, press AUDIO
SELECT to select how the audio will be heard through the
speakers. Normally set to the Hi-Fi STEREO position, this button
can be set to the MONO position if the stereo broadcast or
videotape audio is of poor quality. The "R" and "L" positions allow
the audio from the Right or Left Hi-Fi channel to be heard over
both TV speakers. This button has no effect when viewing a MONO
video tape or TV
program. Each time
when you press the
button, OUTPUT
SELECTION display
appears on the screen
for several seconds.
Refer to the chart below.
Second Audio Program (SAP)
Your unit is fitted with a SAP broadcast system which enables
you to switch to a second audio program when viewing a
selected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
1
Press SETUP/TV MENU in the TV/VCR mode. Then press
or
to select
option.
2
Press
or
to select "SAP".
Then press
to select "ON".
3
Press SETUP/TV MENU
repeatedly to return to normal
screen.
Listening to SAP
When the unit is turned on or a channel selection is made, make
certain the letters "SAP" appear on the screen. This means that the
"Second Audio Program" broadcasting is available.
STEREO SAP
31
STEREO
OUTPUT
SOUND HEARD ON BOTH
SELECTION
SPEAKERS
STEREO
STEREO
L ch
LEFT CHANNEL AUDIO
R ch
RIGHT CHANNEL AUDIO
MONO
MONO
CH
LANGUAGE/
IDIOMA/LANGUE
PICTURE
SAP
PICTURE PREFERENCE
/ / / MENU
OR
SAP
05`07`06, 09:32
ON
31
Publicidad
Capítulos
Tabla de contenido
