Duplicating A Video Tape - memorex MVDT2002B Manual Del Propietário

All manuals and user guides at all-guides.com

Duplicating a video tape

If you connect the unit to another VCR or camcorder, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
1
Load a blank cassette tape with the erase
prevention tab intact into the recording unit.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
2
Press SPEED to select the desired tape speed
SP or SLP.
It is recommended that you set the speed to the
SP mode on the recording unit for best results.
3
Press INPUT SELECT to select AUDIO/VIDEO
input position. "LINE" will appear on the screen.
Connection with second Video recorder
Playback VCR
To VIDEO OUT
Recording unit
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
5V40701A [En]40-41
Duplicating a video tape
4
Press REC/OTR on the recording unit, then press
PAUSE/STILL.
5
Press the PLAY button on the playback VCR or
CAMCORDER, then press the PAUSE/STILL
button.
6
Release the recording pause and the playback
still simultaneously to begin the duplicating
process.
Connection with Video camera
To AUDIO (R) OUT
To AUDIO (L) OUT
AUDIO/VIDEO
Cord (not supplied)
To VIDEO IN
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's
instructions. A typical camcorder dubbing hookup is
shown above.
41
Playback Camcorder
To AV Jack
Recording unit
To AUDIO (R) IN
To AUDIO (L) IN
AUDIO/VIDEO Cord (not supplied)
41
05`07`06, 09:34