Makita HB350 Instrucciones Originales página 3

HB350 SPECIFIFCATION
Cutter capacity
Chuck Capacity
No load speed
Power consumption - 1050w
Clamping force
L x H x W (mm)
Weight
Voltage
Sound pressure level - 89.13 dB(A)
Sound Power level
I : Integral c o o l a n t s y s t e m ,
NCLUDES
W a r r a n t y , Carrying case, Allen keys, Safety
strap & Guard
• Due to our continuing programme of research and
development, these specifications are subject to change
without notice.
- 35mm
- 13mm
- 850 rpm
- 8000N (815kg)
- 225 x 490 x 195
- 11.
- 110/230v
- 100.12 dB(A)
THE BROACH CUTTING CONCEPT
If you are unfamiliar with the use of annular
(or broaching) cutters, take a few minutes to
read this guide - you will benefit from the better
performance and longer life of the tool if you
understand the concept.
Annular c utters only c u t m arterial a t the
periphery of the hole, rather than converting
the entire hole to shavings. As a result, the time
and energy required to make the hole is lower
than for a traditional twist drill.
The b r o achhing c a p a c ity o f a m achine is
therefore, greater than the twist drill capacity.
The slug ejected after the cut also has a higher
scrap value than shavings.