Hamilton Beach 62695N Manual Del Usuario página 5

840163501 ENv03.qxd:Layout 1
How to Use Your Stand Mixer
1
Always make sure mixer is
unplugged and speed control is
set to OFF ( O ).
5
Plug in mixer.
10/6/09 3:44 PM Page 5
2
With platform level, place the L-
shaped tab on platform into slot
on bottom of mixer.
6
Move speed control to desired
speed. Start at 1 and increase
speed as needed.
3
Gently press the back of the
mixer onto the platform until it
locks into position.
7
When finished, turn speed control
to OFF ( O ). Then unplug.
4
Following diagrams on bottom of
mixer, insert desired attachment(s)
into proper openings on bottom
of mixer. Push and click into place.
8
To eject attachments, push straight
down on the speed control.
5