Tripp-Lite N785-I01-SFP-DU Guia De Inicio Rapido página 6

Installation
Copper to Fiber Installation
Notes:
• The following installation instructions refer to an installation in which
one media converter is used to increase the maximum distance
between a copper switch and a fiber switch.
• To effectively communicate between media converters, the speeds of
the copper and fiber ports of each media converter should be identical.
The diagram and table below show the speed you should use between
media converters and switches, as well as which LED will illuminate
with respect to that speed. The diagram also shows how one media
converter can be used to increase the distance between a copper
switch and a fiber switch.
Ethernet copper switch/
1. Optional: Connect the included DIN Rail Kit to the unit using
the included mounting hardware.
2. Connect the RJ45 port of an unmanaged copper Ethernet
switch to the RJ45 port of the N785-I01-SFP-DU media
converter with a user-supplied Cat5e/6 cable.
3. Connect a transceiver to the media converter's open SFP port.
4. Connect fiber cabling matching the transceiver and switch
type between the transceiver's port and an unmanaged fiber
Ethernet switch.
-07-116 93-3F8F.indb 6 -07-116 93-3F8F.indb 6
IP-CAM
Copper
100/1000M/Auto
N785-101-SFP-DU
Fiber
100/1000M
6
Ethernet FIBER switch
11/29/2021 3:14:59 P 11/29/2021 3:14:59 P