Before Use - Chal-tec fun pro 5 Manual Del Usuario

BEFORE USE

1. Set up handlebars
Place one foot on the footboard.
Move the lever on the 45° connector
as shown in the drawing. The locking
mechanism opens and the handlebar
section can be raised.
2. Adjusting the height
You can use the height adjustment to adjust the handlebar to the height of the
person riding. The handlebars can be fixed steplessly at any height. Ideally, the
arms are bent at the elbow by Approx. 135°.
Open the quick release on the
handlebar.
Set up the handlebar stem until
it clicks into place. You can see
this by the bolts at the connection
between the footboard and the
45° connector. To check, wiggle
the handlebars to see if they are
securely locked in place.
Extend the handlebar to the desired
height.
EN
11