Insist on a genuine GWF3L Vitapur
Replacement Filter for great tasting water!
STAGE 1: PREFILTER CAP
Collects and guides water into filter.
Separates large particles from water.
STAGE 2: FINE POLYFIBER PAD
Strains large sediment from water and
slows water flow.
STAGE 3: DIRECTIONAL FLOW MEDIATOR
Directs water flow into center of filter to enhance
contact time with specialized filter media.
STAGE 4: FILTER SCREEN
Filters medium to small particulate/sediment.
STAGE 5: MEDIA FILTER BARRIER
STAGE 6: LEAD REDUCTION MEDIA MIX
Highly efficient in reducing chlorine taste and
odour and treated to pre vent microbial growth.
STAGE 7: SUPERIOR MICRON POLISHING FILTER
GETTING STARTED
All of the following should be done with clean hands.
1. Remove Replacement Filter from plastic wrap.
2. Soak the filter in cold tap water for 30 minutes before using.
3. Wash all parts (Except Replacement Filter and pre-filter) in warm soapy
water before initial use. THE PARTS ARE NOT DISHWASHER SAFE!
4. Rinse and dry thoroughly.
5. Once filter has soaked for 30 minutes, flush the filter under the tap for 30
seconds and shake gently.
®
OPERATING INSTRUCTIONS
Chemical, Lead Reduction
1
2
3
4
5
6
7