Tripp-Lite NGI-U08C2 Manual Del Propietário página 13

Wiring Power Input
DIP Switch Settings and Reset Button
PWR
RPS
Storm
QoS
P9 100FX
P10 100FX
Reset Button: Press the button for a hardware reset (initialization).
Refer to "Top View of the Terminal Block" diagram for button location.
Note: The reset button function is only for hardware reset, it does not affect any
setting because the switch model does not require software.
DIP Position
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
13
Description
Primary power alarm
reporting is enabled.
Primary power alarm
reporting is disabled.
Redundant power alarm
reporting is enabled.
Redundant power alarm
reporting is disabled.
Broadcast/DLF storm
control is enabled.
Broadcast/DLF storm
control is disabled.
Port-based QoS enabled
on P1 & P2.
802.1p QoS enabled
(default).
Port 9 link speed is set to
100Base-FX.
Port 9 link speed is set to
1000Base-SX/LX.
Port 10 link speed is set to
100Base-FX.
Port 10 link speed is set to
1000Base-SX/LX.