Take A Measurement; Measuring Dc Voltage - DATATEC EDU34450A Guia Del Usuario

Take a Measurement

Measuring DC Voltage

1. Press [DCV].
2. Connect the terminals as shown below.
3. Read the display.
– Press Resolution to change the reading speed to either Slow, Medium, or Fast.
– Press Input Z to set the input impedance to either
Do not apply any voltage to the instrument inputs until all terminals are properly connected. Plugging or unplugging
the test lead while high voltage is applied can cause instrument damage, and may increase the risk of electric shock.
30
10MΩ or Auto.
Keysight EDU34450A User's Guide