Uline H-4999 Manual Del Usuario página 2

PAGE 2 OF 9
ASSEMBLY CONTINUED
2. Secure legs to undershelf with set screws using 5/32"
Allen wrench. (See Figure 2)
Figure 2
3. Stand table upright and place tabletop onto legs,
inserting legs into tabletop gussets. With a 5/32"
Allen wrench, tighten set screw on each gusset.
(See Figure 3)
Set
Screw
Gusset
Figure 3
4. Level table with the adjustable feet. Adjustable feet
allow approximately 1" of adjustment. (See Figure 4)
Figure 4
NOTE: Undershelf must be level. Use care not to
overtighten screws or failure will occur.
0421 IH-4999