Subzero BASE-2 Manual Del Usuario página 8

CONTROL PANEL UNDER WINDOWS
This is the SubZero control panel, where you can
edit parameters of the interface. The controls are
simple and intuitive to use, and are as follows.
The control panel gives an indication when the
audio interface is active and ready to use. You can
see this when the mute buttons turn from grey
colour to dark red colour, and when the level
adjustable audio level indicators appear. If these
two parts are not showing, there is a connection
issue, meaning the audio interface is not active.
When active, you can edit the input and output
levels of the audio from this screen, with an
interactive level indicator showing you the level
in real time. You can also mute inputs and outputs
using the MUTE button at the bottom of the panel.
Pre-sets can be saved and loaded. Simply click File
> Pre-set > Save/Load to carry out these tasks. This
allows you to save your level settings so that they
are the same each time you use the audio interface.
Sample rates, latency and buffer number can all be
edited in the config menu.
CONTROL PANEL UNDER MAC
Mac OS X already provides support for class
compliant USB audio devices such as the SZ-AI2.
This means that no software or driver needs to
be installed to use this interface under Mac OS
X. Simply connect the unit with the supplied USB
cable to your Mac and you can start using it. To
make the usage simpler, a control panel application
is included that can be installed from the included
DVD (Mac OS X folder) or downloaded from the
Gear4music website. To install it, open the .dmg file
and then you can drag the control panel icon into
your application folder.
Controlling some of the basic interface options
under Mac OS X can also be done via the Audio
MIDI Setup utility from Mac OS X.
8
EN