MADER 65575 Manual Del Usuario página 46

SAFETY WARNINGS & CAUTIONS
SYMBOL AFFIXED TO THE
SAFETY WARNINGS & INSTRUCTIONS
MACHINE
⚫ UNDERSTAND YOUR LOG SPLITTER
Read and understand the owner's manual and labels affixed to the log
splitter. Learn its application and limitations as well as the specific
potential hazards peculiar to it.
⚫ DRUGS, ALCOHOL AND MEDICATION
Do not operate the log splitter while under the influence of drugs, alcohol,
or any medication that could affect your ability to use it properly.
⚫ AVOID DANGEROUS CONDITIONS
Put the log splitter on a 60 - 75cm high, stable, flat, and level work bench
where there is plenty of room for handling, and help the operator stay alter.
Bolt the log splitter to the work surface if it tends to slip, walk, or slide.
Keep the machine 1.8m away from the receptacle.
Keep your work area clean and well lighted. A cluttered area invites
injuries.
Do not use the log splitter in wet or damp areas or expose it to rain. For
the log splitter equipped with BS plug, plug indoor or onto outdoor
extension cord socket with water-proof device.
Do not use it in areas where fumes from paint, solvents or flammable
liquids pose a potential hazard.
⚫ INSPECT YOUR LOG SPLITTER
Check your log splitter before turning it on. Keep guards in place and in
working order. Form a habit of checking to see that keys and adjusting
wrenches are removed from tool area before turning it on. Replace
damaged, missing or failed parts before using it.
⚫ DRESS PROPERLY
Do not wear loose clothing, gloves, neckties or jewellery (rings,
wrist watches). They can be caught in moving parts.
Protective electrically non-conductive gloves and non-skid
footwear are recommended when working. Wear protective hair
covering to contain long hair, preventing it from get caught in
machinery.
⚫ PROTECT YOUR EYES AND FACE
Any log splitter may throw foreign objects into the eyes. This can
cause permanent eye damage. Always wear safety goggles.
Everyday eyeglasses have only impact resistant lenses. They
are not safety glasses.
Do not put the log splitter on the ground for operations. This is
awkward operating position that the operator has to bring his
face close to the machine, and thus risks being struck by wood
chips or debris.