Application Conditions; Specifications; Electrical Requirements - MADER 65575 Manual Del Usuario

APPLICATION CONDITIONS

This log splitter is a home use model. It is designed for operating under ambient
temperatures between +5
above M.S.L. The surrounding humidity should less than 50% at 40
transported under ambient temperatures between -25

SPECIFICATIONS

Model Number
Motor*
Diameter *
Log Capacity
Length
Splitting Force
Hydraulic Pressure
Hydraulic Oil Capacity
Noise Level
Length
Overall Size Width
Height
Steel Cage
Weight
Wire Cage
* S6 40%, continuous operation periodic duty: time of one load cycle is 10 minutes,
operation time at constant load is 4 minutes, operation time at no-load is 6 minutes.
* The diameter of the log is indicative – a small log can be difficult to split when it has knobs
or a particularly tough fibre. On the other hand, it may not be difficult to split logs with
regular fibres even if its diameter exceeds the max. figure indicated above.

ELECTRICAL REQUIREMENTS

Connect the main leads to a standard 230V+10% (50Hz+1Hz) electrical supply which has
protection devices of under-voltage, over-voltage, over-current as well as a residual current
device (RCD) which maximum residual current rated at 0.03A.
If machine installs BSI approved plug or SEV approved plug, the degree of protection of the
plug and socket combination should be IP44 at least.
o o
C and 40 C and for installation at altitudes no more than 1000m
230V-50Hz, 2300W, S6 40%, 10.3A
78.8 dbA under no load; 89.8 dbA under full load
o
C. It can be stored or
o o
C and 55 C.
65575
50 ~ 320 mm
200-520 mm
7 t
17.8 Mpa
6.5 L
123 cm
59 cm
73 cm
87 kg
82.5 kg