Troubleshooting - Super Ego SEH003500 Manual Del Usuario

Should the machine fail to function after
a long operation time, let it check by a
technician.
3. Replacement parts
− Only use original replacement parts which
are provided by the manufacturer.
DANGER OF ACCIDENT!
- Parts which were not reviewed and
approved by the manufacturer can
damage the machine and can lead to
serious injuries.
- Only use original parts as replacement
parts, especially with safety mechanisms
and cutting tools.
Protección del medio ambiente y eliminación
Packaging materials are raw materials and can be
re-used. Separate the different packaging materials
and take them to a designated waste disposal
facility. More information can be obtained from the
appropriate authorities.
Old machines do not belong in your household
garbage. Dispose of old machines appropriately. We
are all responsible for the environment. The local
authorities can inform you of collection locations
and working hours.
When its useful life is over, do not dipose
or the machine into the domestic waste,
please send it to auhorised places for
recycling.

Troubleshooting

Problem
Motor does not run
Vibrations are too
strong
16
Possible cause
No electricity comes to the machine.
The motor is overloaded or overheated.
Screws or parts of the machine are loose.
The impact drill is not correctly mounted.
The work piece is not properly supported.
Technical data
Operating power:
Capacity:
No load speed:
Geared-rim drill
chuck-capacity:
Protection class:
Maximum drilling depth
Wood:
Concrete:
Steel:
Check the power supplier and the
power line.
Allow the machine to run idle for
about 2 minutes so that it can
cool down.
Tighten all screws.
Mount the impact drill correctly
(see Before operation)
Secure the workpiece (for example
on a workbench).
ENGLISH
230V – 50Hz
710 W
0-3.000 r.p.m.
1,5 – 13 mm Ø.
20 mm
13 mm
10 mm
Solution