Safety Information; Safety Considerations - Retlux RDM 9001 Manual Del Usuario

1. Safety Information

Safety Considerations

Before any operations, please read the following safety precautions to
avoid any possible bodily injury and prevent damage to this product or any
other products connected. To avoid any contingent danger, use this
product only as specified.
Limit operation to the specified measurement category, voltage, or

amperage ratings.
Do not use the multimeter if it is damaged. Before you use the

multimeter, inspect the case. Look for cracks or missing plastic. Pay
particular attention to the insulation surrounding the connectors.
Do not use the test leads provided for other products. Use only the

certified test leads specified for this product.
Inspect the test leads for damaged insulation or exposed metal.

Before use, verify the multimeter's operation by measuring a known

voltage.
Only the qualified technicians can implement the maintenance.

Always use the specified battery type. The power for the multimeter is

supplied with two standard AA 1.5 V batteries. Observe the correct
polarity markings before you insert the batteries to ensure proper
insertion of the batteries in the multimeter.
Check all Terminal Ratings. To avoid fire or shock hazard, check all

ratings and markers of this product. Refer to the user's manual for more
information about ratings before connecting to the multimeter.
Do not operate the multimeter with the cover or portions of the cover

removed or loosened.
Use Proper Fuse. Use only the specified type and rating fuse for the

multimeter.
Do not operate if in any doubt. If you suspect damage occurs to the

multimeter, have it inspected by qualified service personnel before
further operations.
To avoid electric shock, do not operate this product in wet or damp

conditions.
Do not operate in an explosive atmosphere.

Keep product surfaces clean and dry.

Do not apply more than the rated voltage (as marked on the multimeter)

between terminals, or between terminal and earth ground.
RDM 9001
1
EN