Retlux RDM 9001 Manual Del Usuario página 81

5. Multimeter Offline Record
When measuring with RDM 9002, you can use Android device APP to send a
command, the multimeter will start recording the measurements. After
receiving the command, the connection will be disconnected automatically.
The multimeter will record the measuring data in its own memory. After
completion of the record, use Android APP to reconnect the multimeter, and
then you can read the measuring data into the Android device as a CSV file.
You can use this function to record for a long time without staff on duty,
while reducing Bluetooth consumption to conserve the battery power of the
multimeter,.
Note: When the low battery indicator
the offline record function may not work correctly. Please check the
batteries of the meter to ensure them in a good state.
Connect the Android device with the multimeter, see "How to Connect
(1)
with Android Device" on P10.
In APP single view, tap on the
(2)
Set "Record interval" and "Records count" (maximum records count is
(3)
10,000). Tap on
RDM 9001
from the pop-up menu.
. The memory in the multimeter can only
– RDM 9002 only
appears on the meter screen,
icon on the top right, select
13
EN