outside or in vehicles.
•
NOTE: Work light contains a strong magnet in stand-
up base. Do not set work light on or near computer
equipment, computer disks or other types of magnetic
storage or equipment. Magnetic fields can erase data.
•
Never use a cord to carry the light.
UNPACKING
This product has been shipped completely assembled.
•
Carefully remove the tool and any accessories from
the box. Make sure that the light and both chargers are
included.
•
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
•
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
INSTRUCTIONS FOR USE
•
Please check light for damage or cracks before using
as this can cause the product to fail or injure the user.
•
Plug the unit into an insulated Class I (three prong with