TV Ears 5.0 Analog Manual Del Usuario página 5

Step 1 - Place & Power the Transmitter
This step explains where to place the transmitter for the best
performance as well as how to power the transmitter.
The infrared diodes on the transmitter must be in direct line-of-
sight with the headset when using the system for best performance.
There cannot be anything blocking the direct signal, otherwise there
will be no audio received and no sound heard.
1
Place the transmitter on a flat surface that is 3 to 5 feet
(90-150 cm) above the ground. Be sure it is pointed to the
seating area where the headset will be used.
2
Plug the AC adapter into a standard electrical outlet or surge
protector.
3
Plug the end of the AC adapter into the port labelled "12V"
on the back of the transmitter. The correct port has a blue
border around it.
Power Port
12v
2