TV Ears 5.0 Analog Manual Del Usuario página 8

Step 3 - Charge the Headset
This step will instruct you on how to appropriately charge the
headset to make sure you're getting the best use possible.
• Although every TV Ears headset comes with enough of a battery
charge to perform an initial test of the system upon installation, a
full charge of at least 14 hours before first use is
recommended to help prolong the lifespan of the battery.
• The TV Ears headset will last around 6 hours on a full charge,
but will last a lesser or greater amount of time depending on the
average volume level of the headset.
1
Turn the volume knob of the headset to the "off" position.
You should hear and feel a 'click' when the knob has been
turned all the way to the "off" position.
2
Place the headset into the transmitter's charging cradle and
be sure the front of the headset is facing towards the front
of the transmitter.
3
Firmly press down on the headset
when it is in the cradle until it is
secure. The headset should slightly stick
in the cradle when you try to remove it. The charging light will
illuminate when the headset is in the correct position.
5