Tripp-Lite N784-001-SC-MM Manual Del Usuario página 4

Installation
1
2
3
4
21-01-265-933DEC.indd 4 21-01-265-933DEC.indd 4
Connect the RJ45 port on the media converter to your
network using a Cat5e/6 cable.
Connect the media converter to a second identical media
converter using the appropriate type of fiber cable, making
sure to connect the TX port on one unit to the
RX port on the other.
Note: Reference the Product Features section to
determine which type of fiber cable is supported by your
media converter.
Connect the RJ45 port on the second media converter to
your network device (workstation, hub, switch, etc.) using
a Cat5e/6 cable.
Connect the external power supplies that came with each
media converter, and plug them into a power source.
Network
Network
1
L/A L/A
Power Source
Power Source
4
2
Power Source
Power Source
4
Network Device
Network Device
3
L/A L /A
4
7/30/2021 11:20:23 AM 7/30/2021 11:20:23 AM