Checking The Remaining Time; Locating A Specific Track - Sony CDP-XA30ES Manual De Instrucciones

While in Shuffle Play mode ("SHUFFLE" appears in
the display; see page 13), a one-second access time
blank is added between each track. This increase is
automatically added to the total playing time in the
display.
If the disc has more than 15 tracks, the z indication
appears next to 15 on the music calendar.
The information also appears when you press
§ OPEN/CLOSE to close the disc tray.
Display information while playing a disc
While playing a disc, the display shows the current
track number, index number, playing time and the
music calendar.
INDEX MIN SEC
Playing time
Current track
number
Index number (page 12) or Custom Index
number (page 22)
The track numbers in the music calendar disappear
after they are played.

Checking the remaining time

Each time you press TIME while playing a disc, the
display changes as shown in the chart below.
Playing time
and number
INDEX
of the current
track
Press
Remaining
time on the
INDEX
current
track
Press
Remaining
time on the
disc
If the remaining time exceeds 100 minutes
in programme mode, "– – . – –" appears
instead of the remaining time.
Press
1 2 3 4 5
6 7 8 9 10
Music calendar
1 2 3 4 5
MIN SEC
6 7 8 9 10
1 2 3 4 5
MIN SEC
6 7 8 9 10
1 2 3 4 5
MIN SEC
6 7 8 9 10
Turning off the music calendar in the
display
Each time you press DISPLAY MODE on the remote
while playing a disc, the music calendar turns off and
on alternately in the display.

Locating a Specific Track

You can quickly locate any track while playing a disc
using the AMS (Automatic Music Sensor) on the player
or number buttons on the remote.
Number
buttons
>10
=/+
You need to
To locate
Turn ≠ AMS ± clockwise until
The next or
you find the track. When using the
succeeding tracks
remote, press + repeatedly until you
find the track.
The current or Turn ≠ AMS ± anticlockwise
until you find the track. When using
preceding tracks
the remote, press = repeatedly until
you find the track.
A specific track Press the number button of the track
directly Z on the remote
When you directly locate a track numbered over 10
Z
Press >10 first, then the corresponding number buttons
on the remote. To enter "0," use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
Playing CDs
≠ AMS ±
11
EN