Temperature Unit Of Measure Selection; Room Temperature Reading Correction - Lamborghini Caloreclima CRM N Manual De Usuario

3.8 Temperature unit of measure selection

Follow the instructions below to use the Remote Control in °C or in °F.
1. Press the button
2. The display shows parameter CU.
3. Press the button
Set to 0 using the buttons
Set to 1 using the buttons
4. Press any other button to exit the menu.

3.9 Room temperature reading correction

Follow the instructions below to correct the room temperature reading between –2°C and + 2°C in steps of 0.1°C.
1. Press the button
2. The display shows parameter CU.
3. Press the button
Use the buttons
4. Press any other button to exit the menu.
for 3 seconds.
repeatedly until parameter P6 is displayed.
/ to select °C.
/ to select °F.
for 3 seconds.
repeatedly until parameter P7 is displayed.
/ to adjust the parameter in 0.1°C increments.
code 3541Z230 - Rev. 04 - 11/2021
EN
149