Telephone Contact Input - Lamborghini Caloreclima CRM N Manual De Usuario

3.10 Telephone contact input

Normal operation of the Remote Control is ensured as long as the telephone contact remains open. The closing of this contact,
indicated on the display with the symbols
room temperature to a fixed pre-set value.
Follow the instructions below to set the two functions.
1. Press the button
2. The display shows parameter CU.
3. Press the button
Set to 0 using the buttons
Set to 1 using the buttons
parameter P9) when the contact closes.
4. Press the button .
5. The display shows parameter P9.
Set the room temperature value that the Remote Control will regulate when the contact is closed (if parameter P8
has been set to 1) by pressing the buttons
temperature will change rapidly.
6. Press any other button to exit the menu.
Changing the Remote Control operation mode at telephone contact opening or closing can occur with a maximum time of 60
seconds.
EN
150
< >, can be used to force the Remote Control to switch off the heating or to adjust the
for 3 seconds.
repeatedly until parameter P8 is displayed.
/ to turn heating off when the contact is closed.
/ to adjust the room temperature to a fixed pre-set value (via the next
code 3541Z230 - Rev. 04 - 11/2021
/ in 0.1°C increments. By keeping the button pressed the