Baumer NE131 Instrucciones De Servicio página 12

NE131
Installation
12
Connection
The instrument is connected via the enclosed
plug-in screw terminals. Maximum size of core
cross section is 1.5 mm
Assigned contacts
1 Voltage supply AC/DC (pls refer to nameplate)
2 Voltage supply AC/DC (pls refer to nameplate)
3 Common connection Count, Reset
4 Count
5 Reset
6 Main cont. (nor. open)
7 Main cont. (changeover)
8 Main cont. (nor. closed)
9 Keylock
10 Keylock
11 Not assigned
12 Not assigned
13 Leader cont. (nor. open)
14 Leader cont. (changeover)
15 Leader cont. (nor. closed)
Terminal assignment
For litz connection use connector sleeves with
insulating enclosures. For voltage supply please
refer to nameplate..
www.baumer.com
.
2
Main contact = P1
with 1 preset
Main contact = P2
with 2 presets
Assignment 9-15 only
available for counter
models with 2 presets
Leader contact = P1
with 2 presets