Introduction; You Will Need - Boston Acoustics Designer Serie Manual Del Usuario

All manuals and user guides at all-guides.com

Introduction

Note: This manual is written with the assumption that the installer possesses skill in the proper use of hand and power tools,
a knowledge of local fire and building codes, and a familiarity with the environment behind the surface of the wall or ceiling
in which the speakers will be installed.
3
7 ⁄ "
4
(197mm)
3
3 3 6 ⁄ " (172mm)
7 ⁄ " (197mm) 3 ⁄ " (85mm)
4
4 8
336pt speaker system Side view Mounting hole
cutout dimensions

You Will Need

1. A utility knife, electric jigsaw, or other means of cutting a hole in the mounting surface.
2. A #1 Phillips and a flat-blade screwdriver.
3. A wire cutter or stripper for preparing the speaker wires.
5