Safety Precautions; User Servicing Instructions - IRIS WOOZOO PCF-HE15N Manual Del Usuario

SAFETY PRECAUTIONS

Prior to use, please read the safety precautions carefully to ensure proper use. The precautions listed here are described under
classification of Warnings and Cautions, and are intended to prevent harm or damages to users and other persons. All of these
precautions are critical in terms of safety. Please follow them at all times.
Graphic Symbol Indications: Indicates content that could lead to death or injury if handled incorrectly.
CAUTION PROHIBITED
Disassembly prohibited.
Do not disassemble, repair, or modify. Doing so can cause fire, electric shock, or injury.
Repair by persons other than trained repair technicians can be dangerous.
Warning: To reduce the risk of fire or electric shock, do not use this product with any solid-state speed
control device.
Product use.
Use on a level, stable surface. Placing product on uneven and unstable surfaces can cause the product to fall
over, leading to injury or damage to property in the vicinity of the product.
Place the product in locations where it will not get entangled in curtains or hoisting strings, etc. Failing to do
so can cause damage to articles near the product.
Always grasp the power plug to unplug it, do not unplug it by pulling on the power cord. Pulling on the power
cord can damage it, which can cause fire or electric shock.
Always unplug the power plug from the electric socket when the product will be unused for extended periods
of time. Failing to do so can lead to fire or electric shock caused by short-circuits due to reduced insulation.
This product employs overload protection (fuse). A blown fuse indicates an overload or a short-circuit. If the
fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow
product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit
occurred and the product should be discarded or returned to IRIS USA, Inc. for inspection and/or repair.
Unplug.
Unplug the power plug from the electric socket when performing maintenance, inspecting, or moving the
product.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
Grasp the plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
Use power plugs and power cords correctly.
Failing to do so can cause fire or electric shock due to short-circuits.
Insert the power plug securely all the way into the electric socket.
Regularly remove dust from the power plug.
When dust is allowed to build up, insulation is hampered due to moisture, which can cause fire or electric
shock.
Use only 120V AC. Other current/voltage can cause fires.
Do not use if the power cord or the power plug is damaged, or if the power plug is loose when plugged into
the electric socket. Doing so can cause fire or electric shock due to short-circuit.
Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do
not run the cord under furniture or appliances. Arrange the cord away from high traffic areas and where it
will not be tripped over.
Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility
for examination and/or repair.
Do not damage the power cord.
Damaging, modifying, forcefully bending, pulling, twisting, putting heavy objects, or pinching can damage
the power cord, which can cause fire or electric shock.
INSTRUCTIONS THAT MUST BE FOLLOWED
1
Do not use if the power cord is bundled up. Doing so can cause fires. Always extend the cord out before
using.
Do not pull on the power cord when carrying or storing the product. Pulling on the power cord can cause fire
or electric shock.
Stop use immediately, cut power, and unplug from the electric socket when abnormalities or malfunctions occur.
Examples of Abnormalities
Abnormal sounds or odors.
Power plug or power cord become abnormally hot.
Loss of power, etc. when power cord is moved.
The product periodically stops during operation.
Tingling sensation from electric current felt when the product is touched.
Stop use and contact IRIS USA, Inc. customer service at 1-800-320-474.
Do not spray with insecticides, hair sprays, or lubrication oils, etc.
Do not use near flammable substances (kerosene, gasoline, paint thinner, etc.), objects that have flames
(cigarettes, incense, etc.) or combustible materials. Can cause fires.
Do not use the product with air flow pointed at a combustible appliance such as a heater. Doing so can cause
incomplete combustion or scatter flames, which can cause carbon monoxide poisoning and fire.
Wet hands prohibited.
Do not unplug power plug when hands are wet.
Do not use the product outdoors.
Do not use in the vicinity of objects that obstruct the flow of air.
Do not operate while covered or blocked with cloth, paper, or plastic bags, etc.
Do not use in locations where there is a lot of dirt or dust. This can cause short-circuit or fire.
Do not use in rooms with high humidity levels such as bathrooms.
Do not get the unit wet, or put the unit in water. Getting the product wet can cause fire or electric shock.
If handled incorrectly, contents can lead to personal injury or physical damage.
Keep out of reach of children and infants.
Do not climb on or tip the product over. Doing so may lead to injury or electric shock.
Do not drag the product when moving it. Dragging product can damage carpet and floors.
Do not point air flow directly at your body. It generates a very strong air flow.
Be especially mindful not to allow children or elderly people near product. Being near the product can be
harmful to their physical condition and to their health.
Air blowing directly on plants may be harmful.
Do not operate without attaching the vane or the cover. Doing so can cause injury, electric shock, or fire.
Do not strike the unit forcefully. Doing so can cause the product to malfunction, leading to fire or electric
shock.

User Servicing Instructions

If the fuse on your fan has blown, grasp the plug and remove it from the outlet. Do not pull the cord to unplug.
To open, slide the fuse cover towards the prongs of the plug.
Carefully remove the old fuse and snap the replacement fuse into place. To reduce the risk of fire, only
replace the fuse with another fuse of the proper rating (2.5Amp, 125Volt). Slide the fuse door back into place
to close. Discard the blown fuse. The plug should now be ready for normal use.
To reduce the risk of fire, do not replace the attachment plug if it is damaged. Only the fuse should be
replaced. Discard the product if the attached plug is damaged.
If you need further information on how or when to replace the fuse in plug, please contact IRIS USA, Inc.
customer service at 1-800-320-4747.
2