Installation; Installation Requirements - Klarstein ELBRUS Manual Del Usuario

EN
24

INSTALLATION

Installation requirements

• This unit is designed for wall mounting using the wall brackets/fixings
provided. Do not allow any parts of the unit to enter the wall. This unit is
suitable for installation in static caravans.
Site requirements
• The unit generates warm air currents. These air currents transport the warm
air to the wall surfaces near the heater, and the heat rises on these surfaces.
• Installing the heater next to these types of wall cladding or operating the
heater in locations where airborne contaminants (e.g. tobacco smoke) are
present may cause slight discolouration of the wall cladding.
• If the unit is to be fixed to a drywall or timber frame structure, the stability and
load-bearing capacity of the wall for fixing the unit must be checked. In these
circumstances, it is important that the vapour barrier and/or the structural
elements of the house frame are not damaged.
• If you are not sure whether the wall can support the unit and/or what type of
wall fixing to use, you should seek advice from a professional and purchase
the correct fixings. Alternatively, look for a more suitable wall location.
Instructions for installation and use
• Do not build part of the appliance into the wall and do not run the mains cable
under carpets.
• Do not place the unit where curtains or drapes or other soft materials may
cover the unit, e.g. under a coat rack.
• Do not choose a location behind an opening door where mechanical impact/
damage can occur.
• Do not choose a location where the mains cable could become a trip hazard.
• Do not sit or stand on the unit and do not pull on it with force.
• Do not cover the unit and do not insert any objects into the unit openings.
• Do not use the device to dry laundry.
• Do not use the device outdoors.