Tabla de contenido
Publicidad
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 /WMA FILE WHICH STORED IN THE MEMORY MEDIA
WITH USB CONNECTING PORT OR SD/MMC MEMORY CARD.
1.
SET THE SYSTEM AT STANDBY MODE FIRST OR OTHER FUNCTION
EXCEPT SD OR USB MODE.
2.
PLUG-IN THE USB PEN-DRIVE WITH THE FACE UP & MAKE SURE IT GOING
INTO COMPLETELY OR INSERT THE MEMORY CARD IN THE DIRECTION
OF THE ARROW AS SHOWN IN THE LABEL ON THE UNDERSIDE OF THE
MEMORY CARD SLOT COVER. INSERT STRAIGHT WITHOUT BENDING.
CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD
DAMAGE THE AUDIO SYSTEM OR THE STORAGE MEDIA (USB THUMB
DRIVE / SD/MMC CARD). CHECK TO BE SURE THE DIRECTION IS
CORRECT BEFORE CONNECTION.
3.
PRESS FUNCTIONS BUTTON (7) TO "
" USB MODE.
4.
THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER CONNECTING, AND LCD
DISPLAY (16) WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES BEING DETECTED.
5.
REPEAT THE SAME PLAYBACK PROCEDURE AS PLAYING CD/MP3 DISC AS ABOVE.
REMARK
-
IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3 ENCODING
FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS NOT A
MALFUNCTION OF THE SYSTEM.
-
USB PORT DOES NOT SUPPORT CONNECTION WITH USB EXTENSION CABLE AND IS NOT DESIGNED FOR
COMMUNICATION WITH COMPUTER DIRECTLY
REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB / MEMORY CARD, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO EITHER
CD OR TUNER MODE FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET DIRECTLY, FOR
MEMORY CARD – PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD BEING PARTIALLY
EJECT AND YOU CAN REMOVE IT BY HAND.
MORE FEATURES
A. SLEEP SETTING
1. PRESS " SLEEP " BUTTON (3) AND SLEEP INDICATOR "
2. KEEP PRESSING THE BUTTON TO ADJUST THE SLEEP TIMER IN THE ORDER OF 90 > 80 > 70 > .....>10
MINUTES RESPECTIVELY.
3. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.
4. TO CANCEL THE SLEEP MODE, PRESS " SLEEP " BUTTON (3) UNTIL THE "
LCD DISPLAY (16).
REMARK:-
IF PRESS THE SLEEP BUTTON ONCE AND THE "
WILL GOTO STANDBY MODE AUTOMATICALLY AFTER SELECTED MINUTES.
B. ALARM CLOCK SETTING
THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY
CD/TUNER/USB/SD OR BUZZER SOUND RESPECTIVELY.
FIRST, SET THE UNIT AT STANDBY MODE. THEN PRESS AND HOLD THE " ALARM " BUTTON (2) FOR FEW
SECONDS TO ENTER THE SETTING MODE, THE LCD DISPLAY (16) WILL SHOW " ON TIME : AND THEN FIRST
TWO DIGITS OF CLOCK WILL FLASHING:-
1) WAKE UP TIME : PRESS SKIP UP
" BUTTON (2) AGAIN TO CONFIRM. THEN PRESS SKIP UP
SET THE MINUTES.
2) WAKE UP SOURCE : PRESS THE " ALARM " BUTTON (2) TO ENTER THE SOURCE MODE, PRESS SKIP UP
DOWN
RESPECTIVELY.
3) WAKE UP VOLUME : PRESS THE " ALARM " BUTTON (2) TO ENTER THE VOLUME SETTING MODE, THEN
PRESS SKIP UP
LEVEL.
AFTER SELECTING THE TIME/SOURCE/VOLUME, PRESS AGAIN THE " ALARAM " BUTTON (2) TO CONFIRM THE
SETTING.
ENGLISH
" SD CARD MODE OR "
" INDICATOR APPEAR ON THE LCD (16), THE SYSTEM
/ DOWN
" BUTTON (11) TO SET THE HOUR & THEN PRESS " ALARAM
" BUTTON (11) TO SELECT CD, USB. SD. TUNER OR BUZZER MODE
/ DOWN
" BUTTON (11) TO PRE-SET THE WAKE UP VOLUME
ENG 5
" SHOWN ON THE LCD DISPLAY (16).
" INDICATOR DISAPPEAR ON
/ DOWN
" BUTTON (11) TO
/
Publicidad
Tabla de contenido
