Adjusting Program Schedules; Overriding Schedules Temporarily; Overriding Schedules Permanently - Honeywell Wi-Fi Serie Manual Del Usuario

Adjusting program schedules

1 Press SCHED, then EDIT. Screen displays day
buttons at top.
2 Press day buttons (MON–SUN) to select days.
3 Press or
s t
day(s).
4 Press or
s t
temperature for this time period.
5 Press another period (LEAVE, RETURN, SLEEP)
and set time and temperatures for each.
6 Press to save and exit (or press
DONE
to exit without saving changes).
You can press
Note:
any unwanted time period.

Overriding schedules temporarily

1 On the home screen, press
immediately adjust the temperature.
2 Adjust the time to when you want the hold to
end (the default is the end of the current period).
The new setting will be maintained until the time
shown under Hold Until. When the timer expires,
the schedule will resume, and the temperature
will return to the setting for the current time
period.
To cancel the temporary setting at any time, press
(or SCHED). The program schedule will
CANCEL
resume.

Overriding schedules permanently

1 Press to permanently adjust the
HOLD
temperature. This will turn off the program
schedule.
2 Whatever temperature you set will be
maintained 24 hours a day until you manually
change it or press
"Hold" and resume the program schedule.
33-00133ES—01
to set Wake time for selected
to set Heat and Cool
CANCEL PERIOD
or
s
(or SCHED) to cancel
CANCEL
CANCEL
to eliminate
to
t
16
MORE
SLEEP
SLEEP
Inside
Temporary Hold
Hold Until
MORE
Inside
Permanent Hold
MORE