Teac MP-4000 Manual Del Usuario página 4


Earphone jack
Connect to earphone cable

Volume – /Volume +
‘
USB jack
Connect to a PC with an USB cable:
1. charging the battery (player can be switched off)
2. data transfer (player has to be switched on)
•
SD card slot
– The contacts have to be arranged in the direction of the screen.
– To take out the card, push the SD card slightly into the case. After it is ejected
partially you can take it out.
Reset The unit is set to a predefined state.
Antenna DVB-T
If necessary: pull antenna out of the case and adjust it.
Cradle hole
External antenna port
Important: In radio mode earphone serve as an extended antenna, so please
keep them plugged in.
You will find a detailed manual on the provided CD
Copyright © 2007, TEAC Europe GmbH. All rights reserved. Edition: November 2007
•
ENGLISH
‘

