Tripp-Lite DWM3780XOUT Manual Del Usuario página 4

Assembly
1A
Mount on Wood Stud Wall
Find and mark the exact location of
• Make sure that mounting screws are anchored into the center of the studs. Use of a stud finder is highly
recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined load of the equipment and
all attached hardware and components.
20-07-197 933CC6.indb 4 20-07-197 933CC6.indb 4
mounting holes
W-C
W-A
Drill pilot holes
WARNING
4
2.4" (60 mm) 2.4" (60 mm)
Ø 5/32" Ø 5/32"
(Ø 4 mm) (Ø 4 mm)
Screw the wall
mount onto the
wall
10/12/2020 1:41:05 PM 10/12/2020 1:41:05 PM