M12 Y-Cable And M12 Y-Connector; Product Information - Siemens SIMATIC ET 200eco PN Guia De Inicio Rapido

SIMATIC
ET 200eco PN

M12 Y-cable and M12 Y-connector

Product Information

Introduction
The Y-cable and the Y-connector allow the double connection of actuators respectively sensors to the inputs or outputs
using the M12 connection technology.
We recommend that you use the Y-cable respectively Y-connector if 2 channels are occupied per I/O device socket. The Y-
cable and the Y-connector distribute the two channels to two circular connectors each.
Y cable (6ES7194-6KA00-0XA0)
The following figure shows the structure of the Y-cable.
Figure 1 Y-cable
Note
The cable does not fulfil the requirements according to NEMA 250 Type 4X.
Y-connector (6ES7194-1KA01-0XA0)
The following figure shows the structure of the Y-connector.
Figure 2 Y-connector
© Siemens AG 2015 - 2018. All rights reserved
A5E02512963-AC, 10/2018
3