Handles Assembly For Handling - MAHLE Digital ADAS 2.0 Manual De Instalación

18
Digital ADAS 2.0
Installation manual
7.4
Handles assembly for
handling
The structure is equipped with wheels and can
therefore be moved by pushing it using the spe-
cial handles.
Tools needed:
3 mm Allen key
n
Assembling the handles
1 Insert the long screws with washers
in the appropriate holes of the handle
tube, reaching the threaded holes of
the structure
Note: Carry out the operation for both
handles
2 Tighten the screws using a 3 mm
Allen key
1 2